The CCV-PA500 ventilator is an electrically controlled pneumatic ventilator integrating such functions as time, volume cycling, pressure limit, etc. It is mainly intended for providing ventilation
Ship Way：
DHL, UPS, federal, air freight to airport, sea freight, air freight forwarding help you clear customs
Technical Parameters Display: LED Display Following Parameters Operating mode and respiratory rate; ——Ventilator control frequency set by medical staff; ——Tidal volume of each breath in the patient; ——Occurrence of spontaneous breath in the patient and spontaneous breathing frequency; ——Expiratory phase and inspiratory phase and actual respiratory rate; ——Minute volume; ——Setting and adjustment of inspiration triggering pressure, PEEP, and highest airway pressure; ——Real-time variation in internal airway pressure.
Ventilator Construction: --Environmental Protection Material construction, hardly to be broken. -- Trolly: Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions Product Features Physical specifications Display LED Display Mode:pneumatically powered and electrically controlled system Trolley:Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions Technical Specifications: Gas requirement:Medical oxygen with a pressure ranging from 280~600kpa safety valve:<12.5 kPa Respiratory Rate:6~60 times/ min Oxygen concentration output:<50% minute volume:≥18L modes of ventilation:A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL PEEP:0.1 ~ 1.0 kPa Ptr:-4 ~ 10 hPa IMV frequency:1~12 bpm I/E Ratio:1:1.5; 1:2.0; 1:2.5; 1:3.0 Tidal Volume:0-2000ml Inspiratory Plateau:0~1s Maximum Safety Pressure:≤ 6.0kPa Sigh: one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point Pressure limit range:0 ~ 6.0 kPa Airway pressure alarm: Audible and visual and with yellow and red color indicating Lower: 0.9 kPa ~ 5.4 kPa; Upper: 0.5 kPa ±0.2 kPa Ventilation Volume alarm: ≥ 18L/ MIN Power Supply Alarm "Ac/dc power supply are after failing to send out alarm immediately Alarm Time: keep >120s" The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator. Operating conditions Ambient temperature:10 ~ 40oC Relative humidity:no higher than 80 % Atmospheric pressure:860 hPa ~ 1060 hPa Power requirement:100-240 Vac, 50/60 Hz; Attention:the AC power supply used for the anesthesia machine must be well grounded. Attention:the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993, an oxygen monitor complying with ISO 7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical Electrical Equipment Part II: Special Requirements for Safety and Basic Performance of Anesthesia System. Storage Ambient temperature:-15oC ~ +50oC Relative humidity:no higher than 95 % Atmospheric pressure:86 kPa ~ 106 kPa. It should be stored in a room without corrosive gas and well ventilated Package packaging box comply with the requirement of GB/T 15464 Between the packaging box and product, soft material with appropriate thickness provided to prevent loosening and mutual friction during transportation Moisture protection and rain protection to ensure that product is protected from natural damage. Safty & Alarm Gas source pressure:Immediate alarm; “high level alarm” indicator flickers raising an audible alarm. Airway Pressure Alarm:The airway pressure exceeds 15hpa. The maximum delay is no longer than 17s. The “high level alarm” indicator flickers raising an audible alarm. Tidal Volume Alarm Lower than 50ml, The alarm will be raised after one breathing cycle. Ventilation Volume Alarm:Lower: 0~12L/Min; Up: 18L/ Min Battery Voltage Alarm:It alrms when the battery voltage is lower than 10.5V. Power On Self Test:Self test before working, assure it's working normally.
STANDARD CONFIGURATIONS QTY NAME 1 set Main unit 1 set Oxygen tube 2 set Silicone Mask 1 pc Power line 2 pcs Threaded pipe 2 pcs Standard Pipe 1 set Oxygen Reducer 1 set Humidifier 1 pc Battery 1 set flow sensor 2 pcs A leather bag ( Blue) 1 set Tools with the machine 1 set User Manual (English Version) Kits Ventilator(including air-oxygen mixer,automatic airway pressure relief valve),oxygen cylinder,regulator,face mask,laryngoscope,endotracheal tube,suction device,suction union pipe,airway opener,oxygen refill fitting,oxygen supply extension pipe,wrench,portable nylon bag or hard case.
